Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
jmhusby

Question about deck paints????

Recommended Posts

jmhusby
I know most are still dealing with snowblowers yet, unfortunately we are getting about an inch if we get any, but I want to get something for the deck on my Prestige, its new. Did a search for deck paints and only came up with Hotrods Line-X plus someone mentioned Por-15. There were several posts on the subject last Summer on the various boards and one gentleman mentioned a special paint he uses with good results and it was over $30 a quart. Unfortunately I don't remember which board and I took good notes but my notes got lost in the shuffle. My search techiques aren't the greatestXX(XX(

Share this post


Link to post
Share on other sites
hotrodtractor
love my linex.. but have to strip deck to do it. I would do it again. Rustoleum hammered is good but not sure it would hold up. On the underside not much can survive. I would like to try to do a stainless steel liner or plastic mold...but that's high dollar talk

Share this post


Link to post
Share on other sites
RedbarnRick
quote:
Originally posted by hotrodtractor
love my linex.. but have to strip deck to do it. I would do it again. Rustoleum hammered is good but not sure it would hold up. On the underside not much can survive. I would like to try to do a stainless steel liner or plastic mold...but that's high dollar talk
Why do you have to strip the deck? Don't truck bed liners get sprayed over paint on new trucks?

Share this post


Link to post
Share on other sites
xxsponkyxx
I have restored a few cars and used Por15 on the chassis. Its a very tough , hard setting paint and holds up extremely well.Brushed on it levels nicely. Once opened you will need to keep it in the fridge. Love the stuff.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • MarksA-C
    • Chris727
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×