Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

CAT 0 3 Point


Mike-GA

Recommended Posts

Has anyone ever tried to modify a Cat 0 3 point implement to pull behind a B10? I am thinking of using a pinestraw rake behind my B10. It only weighs 50#s so the weight should not be an issue. My thoughts were to use the lift for the top link and fabing brackets for the frame. Would this be a problem with any side movement or pull? I know they make rakes that can be pulled but I would like to be able to lift the rake to back into beds and planters.
Link to comment
Share on other sites

i used a disc harrow from a sears suburban tractor which had a cat O hitch, at least that's what i think it was. anyway, i welded two flat bars to it to attach at the bottom of the rear hitch. then i welded a length of chain to the top to go to a 1 inch rod in the sleeve part of my Big Ten hitch. did the job but as soon as i aquired an original Simplicity disc i retired, and sold, the sears disc. did basically the same thing to a brinley bottom plow that came with that same suburban. also worked well. in both cases, i kept in mind that i would want to return the implement to original condition at some point in time (i was hoping to restore the sears) so i didn't hack up anything, just added to it.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...