Eddie 0 Posted July 22, 2001 I have an electrical question to ask. My battery is not charging, all my wires are wired correctly and my generator works, so I've come to the conclusion that my regulator may not be working, so I took the cover off and there are points in it, just one. I cleaned them and started the tractor up, the points were not moving, if anyone would happen to know how those points should open and close I would appreciate it if you could get back to me, thanks. Share this post Link to post Share on other sites
MPH 12 Posted July 22, 2001 Those "points" are actually contacts. Click the link below for member Al Eden's excellent series of articles. After reading them, you'll be an expert.[A href='http://www.simpletractors.com/service/electrics/electrical_systems.htm']http://www.simpletractors.com/service/electrics/electrical_systems.htm[/a] Share this post Link to post Share on other sites
JimV 0 Posted July 23, 2001 Try grounding the field terminal on the gen. for a test of the gen. if this test shows high charge the reg is at fault. Cal Share this post Link to post Share on other sites