Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
kilalove21

need some help mounting my tiller

Recommended Posts

kilalove21
i bought a tiller for my broadmoor 738, there is only a few things missing so i need some measurements to start fabricating. here is a drawing with the measurements that i need: [url="pop_download.asp?mode=Edit&dir=kilalove21&file=71086"][img]images/disk.gif[/img][/url] in addition to this i need the size of the pulley that bolts to the bracket for the strut assembly. any and all info would be great and appreciated. bo

Share this post


Link to post
Share on other sites
timflury
Here's a drawing of the hitch.


The spring is very heavy. It is used to assist lifting, and it helps the tiller "float". I used large spikes cut to length and drilled to accept the clevice pins to attach the idler bracket to the plates on the trans. Part number 3 I made from a piece of 1/2" pipe with a 1/2" bolt welded to it and a hole drilled also to accept a clevice pin.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×