Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
GLPointon

Hydraulic Pump Mystery

Recommended Posts

GLPointon
Does anyone recognize this Hydro unit. It is AC orange, it has a belt driven Hydraulic Pump w/resivoir, a 3000PSI gauge and flare Pressure & Return fittings and some other tank piping..?






Any info or ID will be helpful...Thanks

Share this post


Link to post
Share on other sites
BLT
It appears to be a Vickers V10 pump with about 10 gallon cartridge , two bolt "C" flange, keyed shaft. It can be RH of LH rotation depending which way the rotation arrow points on the cartridge. There is a machined face on the back with all the data stamped on it. The reservoir appears to be made from a oil filter can. If pump works first thing I would do it is make a new reservoir as that is a crappy design as it funnels all the crap that might be returned into the suction hole. It is capable of 2000 psi and will run a FEL.

Share this post


Link to post
Share on other sites
BLT
quote:
Originally posted by goatfarmer
Almost looks homemade.....
The reservoir does, made from a Detroit Diesel oil filter can, two quart capacity. That 1/4" drain plug to drain the can before removal is an indicator. A plate was welded on the large opening for the return lines.

Share this post


Link to post
Share on other sites
GLPointon
As always Bob you are spot on...Under alot of layers of paint I found the Vickers name, rotation arrow, and the machined area with alot of #'s...but its gonna take some work to clean it up enough to read them all without damaging the #'s... What did you mean by 10 gal cartridge? Is that a volume measurment like GPM?
quote:
Originally posted by BLT
It appears to be a Vickers V10 pump with about 10 gallon cartridge , two bolt "C" flange, keyed shaft. It can be RH of LH rotation depending which way the rotation arrow points on the cartridge. There is a machined face on the back with all the data stamped on it. The reservoir appears to be made from a oil filter can. If pump works first thing I would do it is make a new reservoir as that is a crappy design as it funnels all the crap that might be returned into the suction hole. It is capable of 2000 psi and will run a FEL.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×