Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
bud119195

Hi Lo

Recommended Posts

bud119195
Was off work this week so I thought I would get the hi lo's out and clean them up. Got 2 for the broadmoor and one for a yeoman








Also got one more for the 725 when I get around to painting it


I figured as long as I was at it I may as well make all new stops .All of the old ones were wore on both sides


Share this post


Link to post
Share on other sites
timflury
Nice start Todd. Now I know why you asked for some shift pivots in Hartford.:D:D Make sure you remove that grease fitting from the large frame gearset. Install a short 1/4"x28 screw or bolt in there. Looks like I'll have to churn out another batch.

Share this post


Link to post
Share on other sites
bud119195
quote:
Originally posted by timflury
Nice start Todd. Now I know why you asked for some shift pivots in Hartford.:D:D Make sure you remove that grease fitting from the large frame gearset. Install a short 1/4"x28 screw or bolt in there. Looks like I'll have to churn out another batch.
Thanks and its not a big rush for the pivots but I will need three sets.Two sets that i got are usable yet. Im thinking of repainting the yeoman one and install it on the T8 Oh yeah I also sent you a Email for a link to some cheap Delrin

Share this post


Link to post
Share on other sites
Sign in to follow this  

×