Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Voltage regulator 9020


Recommended Posts

It should be mounted inside the frame rails at the point where it flairs around the engine mount. To get to it you will have to either remove the dust shield from below the frame and try to get it from the bottom side or you will have to remove the fuel tank, oil cooler and various shrouds and you may be able to get at it from above. If I recall it is on the right side as you sit on the seat. Good luck.
Link to comment
Share on other sites

This topic is now closed to further replies.
  • Create New...