Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
DaveTenney

Briggs Rebuild - Shims

Recommended Posts

DaveTenney
I'm in the middle of my first rebuild on a 30 cube briggs that I had bored out to use the 16hp piston. I'm starting to put the thing back together, but am hung up on two things. 1. There are three different gaskets listed for the flywheel side bearing support - 270513,270514, and 270515. They are all .005" different from each other. How do I know which one to use? 2. Same thing with the support piece for the cam on the fly wheel side - 270516, 270517 and 270518 except those are .002" apart. How can I tell which one of these to use? I'd sure like to figure this out with out having to buy all of these different gaskets...Any help would be appreciated! Thanks! Dave Tenney

Share this post


Link to post
Share on other sites
BLT
Go here, http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=jgEDGP_byN1tG_Exj7mRgtLvBCd6 , toggle way down to crankshaft end play. It is explained there.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×