Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  


Recommended Posts

Welcome to the club Steve, at last someone in the nearby area! Anything less than an hour travel is in the neighborhood. First off the mid PTO for the Hydro lift is the same as for the Armstrong model, but the begging question would be what model of 10HP Landlord? Mine is the 1968 2110, I'm converting to 14 HP, and adding a hydro-lift from a B-110. See Show & Tell Forum, under discussions/Tractor. It's very informative and interesting. I have a mid-pto from the 2110, that will become available later this Summer. The BGB in my Big Ten (compatible) was ravaged for parts for the 2110 BGB (Cross shaft), 'cause my shaft's key-way had become brilled. as to rest of the parts in the Big Ten BGB? Might just need a couple or two. Wayne

Share this post

Link to post
Share on other sites
Actually, the hydro lift vs non hydro lift did impact the mounting bracket for the mid PTO. I'm not sure it would make much difference in the operation of the PTO, but they did differ slightly. I'm guessing anyone selling a mid PTO (which are plentiful), would not likely include the upper mounting bracket that bolts to the frame. Most I see on ebay don't have that part, and msot tractors still have it bolted on. Best bet is to post a want ad in the classifieds...you'll have a PTO on your doorstep by Saturday. I know I have several extras I'll never use.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • Bear
    • Bill725
  • Today's Birthdays

    1. cojo92
      (29 years old)
    2. Rebel_Ron
      (36 years old)
  • Recent Status Updates

    • SonOfCreepfeed


      Thinkin' about this old girl.

      · 1 reply
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁

      · 1 reply
  • Adverts