Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Source for 3" Tiller Drive Pulley


bowhunt4life

Recommended Posts

Anyone have a part number or a source for a 3" Tiller Drive Pulley? Yellow B-10 just got a tiller and needs a drive pulley. I thought McMaster-Carr but an not sure which pulley. I know it is a 3" pulley but the bore size?
Link to comment
Share on other sites

There is a place up on the web, Phoenix MFG. I have gotten pullys from them. But I always check at the local TSC, Farm and Fleet, Menards kind of places. We also have a couple of local True Values that cater to the Farm crowd. Just make sure you get the right width v groove also.
Link to comment
Share on other sites

All you gotta do is go their site and search on 'v belt pulley'... They have every size you'd ever need. http://www.mcmaster.com/#v-belt-pulleys/=h1os0b
Link to comment
Share on other sites

Go into electric motor section of any farm store. They should have all sorts of pulleys. And when you check out groove size, it should be a "B" width which equates to a 5/8" belt.
Link to comment
Share on other sites

Yes the bgb shaft is 3/4 which is why you want a pulley with a 7/8 bore in order to slide over. I went to TSC and called a simplicity dealer and struck out. I ordered from Phoenix mfg and they are in Horicon, WI which isn't to far from me so the pulley will arrive by Thursday and Yellow B-10 will be tilling before he knows it. Thanks for all the help. Chris
Link to comment
Share on other sites

Here is a link to what I ordered; [url]https://phoenix-mfg.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=19&category_id=32&option=com_virtuemart&Itemid=56&lang=en[/url] I ordered the 7/8 bore. Correct me if I am wrong
Link to comment
Share on other sites

Ray's indicating it needs to be 7/8 bore, and BLT and a few others are indicating 3/4 bore. Evidently one of them made a typo, I'm just not sure which one. I don't have my tractor here to measure mine, but for some reason 3/4" strikes in my memory. I'm sure someone will be along shortly to definitively clear up the confusion. If it's 3/4" bore, I think you need one like the top one listed on this page: http://www.mcmaster.com/#v-belt-pulleys/=h1rgbk
Link to comment
Share on other sites

After my last post I did a quick search. It looks like you asked this same question a couple years back, and Mr. Flury provided the answer: http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=112570&SearchTerms=tiller+pulley
Link to comment
Share on other sites

You know I thought I asked this question and I was asking this time on behalf of Yellow B-10. I couldn't figure out how to search past threads and was in a hurry. So glad the members here are patient and helpful. I did order the correct pulley! Thanks all.
Link to comment
Share on other sites

The bore size on the tiller side of the driven shaft is 7/8 inch. The opposite side that the transmission pulley is on is 3/4 inch or .781" one or the other. I have a couple pulleys and a half dozen or so of the driven shafts.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...