Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Mounted the Deck on the 725


CDeHeer

Recommended Posts

I finally found the time to clean up and mount the deck on my 725.


Deck did have a badly worn mid roller assembly.




I welded some 3/16" x 1 1/4" x 3" bar stock to the brackets drilled to 5/8 to accomadate the new shaft. .




Mounted the deck and it engaged and Whirrred great - for a minute then the motor died. Starts back up but repeats 30-40 seconds after engagement. I suspect the aftermarket plastic float as it sits so high.


Has anyone adjusted the plastic floats with heat on the tab? Any input appreciated.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...