Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
bowhunt4life

Clutch Adjustment-Wheelie Bar Needed

Recommended Posts

bowhunt4life
I need some help adjusting my clutch on my B-10. I release the clutch pedal and the B-10 bits and does a small wheelie about 80% of the time. I am wondering what I need to do to dump the wheelie's and just have a smooth transition from stop to moving? I know there are two bolts at the end of the rod that connects to the break band. Not sure if those are part of the solution. Any suggestions would be helpful. Thanks, Chris

Share this post


Link to post
Share on other sites
rokon2813
In the drive pulley on the gear box on that style tractor, there are 2 pieces of plastic or nylon. One is a flat piece, goes behind the loose portion of the pulley, and the other is a thin strip that wraps around. Sounds like they may be gone or very dirty. I would take the pulley apart, and see if they are there, and if they are, clean and VERY VERY lightly lubricate

Share this post


Link to post
Share on other sites
GregB
Check the condition of the plastic spacers that are supposed to be in the multi part pulley on the BGB. There should be a flat one between the center section and the outside taper v portion. Also a piece on the diameter as well. AZ and AY on the pic below. They let the outer portion slip a little bit, a slip clutch.
[img]/club2/attach/GregB/bgb.jpg[/img]

Share this post


Link to post
Share on other sites
dhardin
Make sure part AK a belt Gard is set very close to the pulley on the BGB output. Or maybe this Gard is missing, very common issue. One would not think this Gard will help with the clutch operation but is is needed and adjusted properly.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • thedaddycat
    • PGL
    • Bill725
    • goatfarmer
    • ParkerBarker
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • SonOfCreepfeed

      SonOfCreepfeed

      Thinkin' about this old girl.

      · 1 reply
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×