Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  


Recommended Posts

i pick 16 hp brigg awhile back was told that it came off a welder model 326437 type 0758-01 code 87082714. can seem to fine any inform on it . it has a factory a no point system. can anyone gave any infro on this engine? THANKS JJ

Share this post

Link to post
Share on other sites
I it appears that it has a fywheel for an alternator and standard crankshaft, same as Simplicity. If you post some pictures, you'll get a bunch of answers.;) P/S: I finally found the type number for the crankshaft in my parts book and as built was a tapered shaft.

Share this post

Link to post
Share on other sites
parts manual http://bsintek.basco.com/BriggsDocumentDisplay/18nnALXAnfBhU7y.pdf operators manual http://bsintek.basco.com/BriggsDocumentDisplay/msowHM-K_ny7tH217FzoPu.pdf website I got them from. http://www.briggsandstratton.com/support/?NTT=326437-0758-01

Share this post

Link to post
Share on other sites
Briggs made your engine on August 17,1987 in plant #14. It's a gear tooth starter type with magnetron ignition (no points). It should look something like this:

It should have a small mica board where the points are normally to connect the kill wire to:

I have electronic copies of both the parts list and operators manual for your spec Briggs. If you want a copy, PM me your email addie and I'll send them to you.

Share this post

Link to post
Share on other sites
If you have a rectifier regulator, like shown in Phandad's second picture mounted on the starter housing, you'll probably have a 10 amp charge circuit. If you have a red or black wire not connected, that'll be your charge wire and the most those are 3 amp. For a generator application that would be all it needs.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • PhanDad
    • jimmystractor
    • Chris727
    • George Drysdale
    • Rigger9020
  • Today's Birthdays

    1. littlemarv
      (43 years old)
    2. Luke
      (40 years old)
    3. mharrison
      (30 years old)
  • Recent Status Updates

    • Bubba1997


      Searching for a Sleeve hitch and breaking plow and other equipment if price is right and also a deck for a B1 thank you 
      · 3 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁

      · 1 reply
  • Adverts