Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Head gasket replacement-Labor flat rate


Tarheel

Recommended Posts

Hi all, As you may have seen in the Talking tractors forum I have just replaced head gaskets on a 25 hp Briggs 445777. Being this was my first I wouldn't want to over charge for my learning. Could anyone tell me what the flat labor rate for this job should be ? Both heads were warped and one cleaned up pretty quickly while the other was bad enough to require some work. Thanks in advance.
Link to comment
Share on other sites

Thanks Wayne, I didn't do a good job asking my question at all and you answered just what I asked. What I should have asked was how many hours should this job take or how many hours will Briggs & Stratton pay for this repair under warranty ? Thanks again and I'm sorry I wasn't clear.
Link to comment
Share on other sites

×
×
  • Create New...