Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

kwik-way loader for RBT?


mike_sdak

Recommended Posts

Hello. I am curious. Does anyone know whether a sears loader (quick way) would work on an RBT? I have a 917 with a 16 Hp briggs. The briggs already has a double sheave on the PTO end, from previous life as an auger engine. That may work to drive the pump. General thoughts?
Link to comment
Share on other sites

I just finished putting a Kwik-Way Loader on an Allis Chalmers 410 RBT. I put a link below of the whole long process... The loader I found was used on Sears, JDeere, Wheel Horse, Bolens, etc... I still have all the installation manuals I downloaded for these brands (I used them for ideas/inspiration to fit to my AC410) sm01 http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=120977 I recomend using a sub-frame like I did to keep the stress off the BGB. Most tractor models use one too
Link to comment
Share on other sites

Thanks, If you need any more info/advice/pics/etc. let me know Good luck...sm01
quote:
Originally posted by mike_sdak
Greg, Thanks. That's quite a project there. I think what you detailed would work just fine. Now for some time,
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...