Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Front PTO pully simplicity


ketchk

Recommended Posts

Doing finishing touches to my landlord putting the rear lift together and im thinking about the front PTO pulley. the one that exits the front grill cant find anything in my landlord manual im sure someone knows the size or part number or where i can get one Thanks
Link to comment
Share on other sites

That cast pulley# is 159128 (4-1/4" diam.). It is mounted with the hub facing forward, and allow 1/4" of shaft to be exposed. That can be found in the installation manual for the #990370 weed cutter, The manual for the 990519 36" blower calls for the end of the hub to be flush with the end of the engine shaft, and calls for a pulley number 106761 (4-3/8" diam). Both pulleys are for a 1" keyed shaft If you need the manuals, send me your email address by email, I'll forward you the PDFs. I'm glad to hear that you are that far along on your project. I have no idea what bearing that 1/8" difference in pulley diameter may have on the effective length of the drive belts for the implements. This may be adjusted by the setup of the idler pulleys on the hitches. Both pulleys are commonly listed as NLA. Cheers, Wayne
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...