Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

pulley sizes


chris87

Recommended Posts

i bought my first simplicity landlord 2010 about a month ago and i got a spring trip blade, mower deck, snow blower, and tiller. I'm missing two important pulleys. one is on the snow blower that drives it and the other is the pulley on the tractor that drives the rear PTO. any help would be a huge help.
Link to comment
Share on other sites

Welcome to the club! 3" X 7/8" bore for tiller. 4-1/2" X 1" bore for snowblower will work. The original for the blower is 4-1/4" that is NLA and used probably would be your only option.
Link to comment
Share on other sites

I would buy stamped steel. They are cheaper and harder than cast iron. They will last longer as well. Use an antiseize in the bores and they will come off alot easier. The cast break easy if they have to be pulled off. The stamped steel bends easy. Antiseize will aid in ease of removal.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...