Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Modifier1

Wheel cross referance

Recommended Posts

Modifier1
I have been looking for rear tires for a 716H 23x10.50x12 and have seen some on craigs list but were on JD wheels will the wheels from JD fit the AC 716H if the tires are the same size?

Share this post


Link to post
Share on other sites
rpickle
I am looking at some ag's mounted on older Cub rims. They are 5 bolt rims, so that shouldn't be an issue, but the offset may. My tractor has the hydro filter sticking out the side, so would have to be sure that was cleared.

Share this post


Link to post
Share on other sites
osenga
I have had one set that didn't work out. The hydro filter wasn't where my problem was mine was when I bolted the tire down it was up against the cone clutch and tractor couldn't budge the starter even

Share this post


Link to post
Share on other sites
Tom45
Some of the Deere and Cub Cadet rims are 8" wide and the bolt pattern is the same, but they are offset about an inch inward resulting in very close clearance with a spin on hydrostatic filter. I cut the welds loose on the centers of a pair of Cadet rims, shifted them and rewelded them. Tom

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • Chris727
  • Today's Birthdays

    1. pitt
      pitt
      (53 years old)
  • Recent Status Updates

    • Bubba1997

      Bubba1997

      Searching for a Sleeve hitch and breaking plow and other equipment if price is right and also a deck for a B1 thank you 
      · 3 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×