Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Need clubs vast knowledge


tbar1.1

Recommended Posts

Hi people, Has anyone ever heard of a "Continental" mower? What I have is a 60" deck that mounts on a 3pt hitch of a small farm tractor, pto drive to gear head that drives a belt to the deck located under the belly of the tractor. The tractor pushes the mower from the three point hitch and raises or lowers it with the 3pt hitch. This is a very heavily built unit that I am trying to convert into a "pullbehind" self powered deck. I'm planning to pull it behind my 4040 as an offset mower. If I can get it done I'll be able to cut a path almost 10 feet wide! Need deck pulleys for it, cast iron, 5 inches in diameter. Any help would be greatly appreciatedon on the mfg of this unit or where I can get some pulleys. Thanks in advance. PS It has tapered shaft on the spindle. Jayt
Link to comment
Share on other sites

I would try a Bearing house or Mill supply for your pulley's. also try http://www.thomasregister.com/ Don
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...