Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
GeorgeM

Alis Chalmers B-12

Recommended Posts

GeorgeM
Hi My Alis doesn't have a blue gown, but it's almost that old. :>}} The steering has almost one half turn of the steering wheel for slop -- way too much. Anybody have experience on this machine who can advise me what I need to do to get the slop out? Everything else is still running fine and it's only the second engine. These beasts are made from 1/4 inch steel and just won't die! Thanks George

Share this post


Link to post
Share on other sites
BenB
Where is the "slop"; steering wheel to shaft, steering gears, steering joints..? Did you read the other similar thread on this page..?[A href='http://www.simpletractors.com/clubhouse/ShowMessage.asp?MsgID=4800&mode=short&startwith=0']http://www.simpletractors.com/clubhouse/ShowMessage.asp?MsgID=4800&mode=short&startwith=0[/a]

Share this post


Link to post
Share on other sites
Guest
if it's in the gear meshing take it in to a tool-n-die place and have them mill out the center of the brakets that the gears sits in and replace the void with a brass bussing then all you have to do is replace the bushing i have done it and love it smother turning and titer fell. good luck

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×