CadLoader for Simplicity 3416

[STUALX]

Has anyone successfully built a CadLoader for the simplicity 3416H ? Where do you get the hydraulics from ? Also does it interfere w/belly 48" mower ?

[Guest]

Hi jim, I just reseaved a set of plans from cadplans. They are well imformed and with simple drawing.They are also nice anough to include a small catalog with prices on all the stuff you need to build the laoder. And there is always Nortern to buy hydro stuff from too. I'am rather new to the small tractor seen so not real sure about your tractor, but I have a 2012 and had to detach the mower, for some of the under mounting I had to do. Yours might be different. I hope this helps. polo

[Guest]

How would I go about getting these cad loader plans,
It

looks like it would be fun to build. Would my old
landlord handle one. Thanks.

[Guest]

Ok first is, make no mistake,this plans are for very general gardening and light work. No you wouldn't want to dig a basement with your tractor. 8o) But to do light duty grading it looks fine for that. The loader I going to build is model 507. The address is www.cadplans.com See easy. Oh look at the pic of the IH cub with one arm. polo

[tej]

I don't know about the CAD loaders but the AC loaders do not interfere with a belly mower. Also if you leave the weight box off you can mount the tiller with the loader on since the loader does not use the tractor hydraulics. Tim