Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
eskimodeb

Cavalier bagger problems

Recommended Posts

eskimodeb
Hi- I have been using my Cavalier tractor and machine since spring with no problem in the tube staying in place. The rubber belt (holding the top portion of the tube section that goes into the bagger) broke last month and the replacement belt doesn't seem to be holding the top portion of the tube in place anymore. I've tried a number of different positions for the belt with no success. The top section of the 2 piece tube (that goes from the deck to the bagger) continues to wiggle apart until it is loose and open so that grass shoots out from the lower portion of the tube into the air! Any suggestions or refinements would be appreciated. Thank you! Deb[A href='eskimodeb@hotmail.com']eskimodeb@hotmail.com[/a]

Share this post


Link to post
Share on other sites
JeffNemes
Is the bag support frame bent backward so that the bags do not hang straight down? This would increase the connecting distance. Mark the tube and measure how much of it is inside the upper elbow. 2-3" is not enough. Also there is a vertical rear support on the top of the mower housing behind the blade that can break off allowing the mower to move around more than designed for.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×