Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
BrendonV

Brakes

Recommended Posts

Kent
They do. There's a short handle down on the side of the frame beside the shifter. It's about 3.5-4" long and bent 90 degrees. Push in the brake pedal and screw in that handle... it will hold the brake linkage rod the same as keeping your foot on the brake. Not the best system in the world, but it works....

Share this post


Link to post
Share on other sites
JDSnyder
Brendon, That 90 degree screw brake lever is no longer an available part so I'm told. If your tractor is missing the lever as mine was, you might try using a star knob with a threaded shaft. I ordered one out of Rockler, the woodworker's tool catalog. I can't remember right now what size the screw stud was, but you could try some bolts in the threaded hole to see. I think it was 3/8???

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×