Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

6-speed swap


TerryM

Recommended Posts

I have nice 914 shuttle. Also have a 710 6-speed with a noisy motor. Was wondering if the bevel gear/trans. out of 710 would fit into the 914?
Link to comment
Share on other sites

Terry, the only thing to keep in mind is the clutch rod will need to be adjusted as the distance to the clutch pedal is a little bit longer on the 914. The Hi-lo lever will replace (along with the linkage) the shuttle in the same mounts. I bolted on a 3-sp variable from a 3314V onto a 917H (for pulling) and had to extend the clutch rod. Everything else worked and bolted up just great. Good Luck! Mike S.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...