Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  

belt adjustments

Recommended Posts

the belt in the front is for the starter generator and the rear belt under the seat should have no more than 1\2 inchy play and when you step on the clutch pedal is stepped on the belt should loosen and to adjust the drive belt shut down the engine and flip open the seat and there is a long clutch rod and there are 2 nuts back one up and the other one you will have to turn and watch the idler to figure out which way is tighten and the others is loosen and the rear axle tube is the rod the hooks the rear wheels to the rear end

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this