Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

B-112 mower pto, etc.


kfran

Recommended Posts

Just bought a B-112 with tiller, snwo thrower and 48" mower deck. I'm a little confused about the pulley arrangement for the mower pto. The idler pulley is currently the lowest pulley which doesn't appear to be right. Also, it has a metal strap bent over it that appears to help keep the belt on. Is this accurate? I bought belts at a Simplicity dealer based on a model 3112v. Is this the corresponding model? The belt for the mower pto appears to be too long, but I'm not sure how it is supposed to be routed. Any info is greatly appreciated.
Link to comment
Share on other sites

The link below is the operator manual for a B series deck. It may answer your questions.[A href='http://www.simpletractors.com/operation/42_mower/42_rotary_mower.htm']http://www.simpletractors.com/operation/42_mower/42_rotary_mower.htm[/a]
Link to comment
Share on other sites

Check the cross reference link below for the proper Simplicity model.[A href='http://www.simpletractors.com/Main/x-ref_table.htm']http://www.simpletractors.com/Main/x-ref_table.htm[/a]
Link to comment
Share on other sites

After you use the cross reference, you can find the proper belt at the link below. This link also has belt lengths.[A href='http://www.simpletractors.com/parts/belts/belts.htm']http://www.simpletractors.com/parts/belts/belts.htm[/a]
Link to comment
Share on other sites

Geez, Herb, you should be manning the counter.... Thanks for the help! Hope your situation allows you to attend on Saturday! :<)
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...