Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Clattering noise in or near bevel gearbox


mrc100_2000

Recommended Posts

I have an allis 712 that i,m working on and I keep hearing this clattering noise near or in the bevelgearbox,I would sure like any suggestions on what to check for to find and eliminate this.I,ve replaced the engine with a 16 horse Briggs and all that i have left is to adjust the carb and get rid of this noise. I had listed this tractor for sell but i may keep it now,i,ve grow attached to it.My landlord is my favorite but this allis is very nice.If i could rid it of this one little problem.
Link to comment
Share on other sites

I am in the process of going through my simplicity 3212.I also was getting noise from the bevel gear box.It turned out to be the key ways were well worn out.All I did was take it apart and milled new keyways in it and put it all back together.Easy way to check it out is to grab the pulley and turn it back and forth if there is a lot of play it will be the keyway that is bad.Bob
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...