Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

pully removel

Recommended Posts


i have a 67 simplicity landlord 2010....if you are sitting on the tractor just below the seat on the right hand side there are three pulleys and the one closes to the front of the tractor (is on a treaded shaft ).. my question is do i unscrew the pulley to remove it..??..( wrong pully and has to be replaced ) or is there a key that has to be removed before you pull it out..??... cause there is a slot in the pulley..??

Share this post

Link to post
Share on other sites

I think you are referring to the slip pulley, which has a hex nut fastening to the shaft and is a three piece cast pulley. If I can remember (a senior thingie) it takes either a 1-1/8 or 1-1/4" socket. Again, relying on the remaining two brain cells, the shaft does have a keyway, and is stepped to backup the inner portion.

Wayne id="Book Antiqua">

Share this post

Link to post
Share on other sites
quote:Originally posted by osenga

Yep this is the same pulley Perry has pictured that I sent you pictures of a few weeks ago. And I have not ever seen one that screws onto the BGB

id="quote">Here is a photo of one getting ready to be removed from my '68 LL. The hex nut (E) that holds the outer sheave can be seen, the drive belt is moved out of the way, and the pull starting cup is removed.


This is from the IPL...

slip clutch IPB.jpg

The inner sheave (AW) is shown to have a set screw and a key (AN and AL). If the set screw becomes loose, the key will tear the "dickins" out of the BGB shaft (the WHY I had to "borrow" the BGB shaft from the BIG TEN).



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • ac.d17iv
    • Chris727
  • Today's Birthdays

    1. Peter Hitchcock
      Peter Hitchcock
      (55 years old)
  • Recent Status Updates

    • F.U.N.

      F.U.N.  »  sandyhillbill

      Dear Sandhillbill
      Can you please copy me on this data, for Sun Star parts list.
      September 12, 2004 Mike I sent you a PM and have all the mfgs. available for the tiller/hitch/pto/liftgroup if you need me to send them to you. Let me know. Thanks, F.U.N.    
      · 0 replies
    • gwiseman


      Club banners are available  for members use during show season https://simpletractors.com/forums/topic/57849-simpletractors-club-banners-available/
      · 0 replies
  • Adverts