Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Testing Mega Fire B110


B110guy

Recommended Posts

Coil, plug, and Mega Fire were all new this past spring, probably have 10 hours on it all. Today when wanting to pull the boys around on their sleds, I have no spark. I'm not man enough to grab the plug wire, but I have no spark from wire to plug, or through the plug to ground. Ran perfect a week ago. Can the Mega Fire be tested somehow and can I do any testing to the coil without pulling the engine? Don't have one of those fancy heated garagessm02

B110guy

Link to comment
Share on other sites

quote:Originally posted by JJ MARSHALL

take your kill wire loose and try it againJJ


id="quote">
id="quote">yep eliminate the kill wire first. make sure mega-fire is grounded/all connections good. could be bad coil , have you checked for mice ?.
Link to comment
Share on other sites

I'll try to get the kill wire checked today. Haven't checked for mice, but it ran perfect a week ago. I know mice can move in that quick, but I'd find it hard to believe in an open garage full of farm cats. Could be bad coil, I went cheap when I bought it last spring.

B110guy

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...