Steve72 0 Report post Posted February 9, 2013 I dropped this dying ash after a pro wanted to charge me $800 to do it. I had to get to fall onto my asphalt drive as there was no place else it could go without hitting my shop or my garage. I had to wedge it a bit and got lucky too. The day was really cold but I was still worried about putting a major divot in the drive so I put two 2 x 12's on end across the drive where I hoped it would land. The plan worked and the 2x's were smashed to bits and didn't leave a mark in the asphalt. My HB pulled the logs with ease back to my splitting spot. Question...how much do you think the 5 x 10 trailer full of wood weighs? Think it approaches 5k or more like 1 ton? My Ridgeline is supposed to pull 5k so wondering if it would handle a few loads like this without much strain. Share this post Link to post Share on other sites
plastikosmd 578 Report post Posted February 9, 2013 Nice job! Share this post Link to post Share on other sites
GLPointon 37 Report post Posted February 9, 2013 Just like Paul Bunyon...but your Ox is yellow Share this post Link to post Share on other sites
perry 0 Report post Posted February 9, 2013 good job on falling that tree. I would have pulled the trailer with the Allis also Share this post Link to post Share on other sites
sb64 0 Report post Posted February 10, 2013 If you did that, you would probably have to invest in some Anti-wheelie bars. Share this post Link to post Share on other sites
fishnwiz 2,852 Report post Posted February 10, 2013 You made it look SO easy! Share this post Link to post Share on other sites
Steve72 0 Report post Posted February 10, 2013 I did try to pull the trailer with Alice but lacked traction so I had to hook up the truck....no guesses on the trailer weight loaded? Share this post Link to post Share on other sites
Tonyvdb 1 Report post Posted February 11, 2013 Some where I read or heard that a cord (128 CF or 4'x4'x8') of oak weights 5,000 lbs, ash being a lighter hard wood would weigh less. It would also make a difference if it was stacked or thrown in the trailer. In any case weight distribution is the key, to much in front of the trailer wheels and you do wheelies to much behind the wheels and no traction. I haul a 5x7 foot trailer and fill it with mixed split hardwood with my 7117 without a problem, although the ground is hard and mostly flat. Nice job in dropping that tree, doesn't seem to be any reason that someone would charge that much to take down a tree. A couple years ago I had two big oaks real close to the house and were leaning that way removed. I had a guy bring his skidder over and pull on them while I cut them. He charged me 200 and took the first log of each tree. Share this post Link to post Share on other sites
perry 0 Report post Posted February 11, 2013 I also haul a 6x10 trailer full of wood around the yard with my FDT's . when they are really full you have to take it easy. weights and chains in the snow would have helped ya . Share this post Link to post Share on other sites
Steve72 0 Report post Posted February 11, 2013 5k lbs. for a chord of oak---tht's exactly what I was looking for to use as a "rule of thumb" measurement. The pro wanted to use a bucket truck to do the job--bring it down one piece at a time to be safe--so I think that's why he was high. My HB would pull it on flat ground but could not get it out of the hole the tires had made while I was loading it. Thanks guys! Share this post Link to post Share on other sites