Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
alliskid

axle tubes

Recommended Posts

alliskid

Have really enjoyed this website since joining in December. I have a Ac 416H with mower and blower, a 310 with mower and blade and tiller, a 312H and a 314H that will run but not move.

I read the tech tips on difs and axle removal and dove in to see if I could find why the tractor will not move. I was hoping for an easy fix but the axle tube is broke off at the inside groove for the keeper ring.

Is there any body out there have a spare axle tube? Is this a complicated fix or should a guy just find a new transmission and be done with it?

Any Suggestions?

Dave

Share this post


Link to post
Share on other sites
rokon2813

Some guys change them but they are expensive.

It's generally cheaper and easier to change out the entire rear, BUT, then you are putting in another 40 year old tube....

Share this post


Link to post
Share on other sites
sammiefish

I think you cross to P/N 1670864SM

which then crosses to about $150+ new...

If you decide to go new... you may want to read this first:

http://simpletractors.com/Club2/topic.asp?TOPIC_ID=110645

when I did mine I went new... and maybe that was about

~$28 ago... but again... 40 years newer...

I think the hydros are prone to the operator changing from

fwd to rev too quickly in too rough terrain and it is just

wears these tubes out at the grooves

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • rscoleman
    • PGL
    • Alltractoredup
    • fishnwiz
    • BLT
    • jrmorrill
  • Today's Birthdays

    1. Josiah deshong
      Josiah deshong
      (37 years old)
  • Recent Status Updates

    • F.U.N.

      F.U.N.  »  sandyhillbill

      Dear Sandhillbill
      Can you please copy me on this data, for Sun Star parts list.
      :
      September 12, 2004 Mike I sent you a PM and have all the mfgs. available for the tiller/hitch/pto/liftgroup if you need me to send them to you. Let me know. Thanks, F.U.N.    
      · 0 replies
    • gwiseman

      gwiseman

      Club banners are available  for members use during show season https://simpletractors.com/forums/topic/57849-simpletractors-club-banners-available/
       
      · 0 replies
  • Adverts

×