Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

landlord2110

Is This Normal

Recommended Posts

Brettw

The bearings may still be bad. It can be hard to feel the play if the idler pulley is keeping the belt tight. Bearings are cheap, hopefully, that's the issue.

PS Looks like a decent deck, a 42", no?

Share this post


Link to post
Share on other sites
Brettw
quote:I tested the pulley off the tractor.id="quote">
id="quote">

There is another belt and idler pulley under the covers on top of the deck. That is the idler pulley I was speaking of. Pull the belt covers on top of the deck (two triangular pieces of steel right on top of the deck, with notches around the center shaft) under there you will find the belt and idler pulley. Disconnect the belt and see what you have. The three bolts hold that pulley in place, there is no spline for that pulley.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×