Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Gannon Earthcavator who has a factory B series on?


mwells

Recommended Posts

Hi guys, I picked up an earthcavator, but the hitch has been cut off and made to a sleeve hitch style. I am wanting to put it back to the factory B series hitch, but need some more hitch dimensions. I think wantedinct has an original one and I got a bunch of dimensions from his post, but there are still a few more that I need. If anyone has one and could help me out I would greatly appreciate it! Thanks!

Link to comment
Share on other sites

Do you know of the factory one has the curved hitch support side plates? I've seen som like that and I was under the impression that those were the factory ones?

Link to comment
Share on other sites

Michael, the shanks are NLA, and impossible to find. The teeth are out there, but under another part number from the manufacturer (I'll have to look at my notes). THe cutting edges are still available, but only for the larger sizes. The ones for the 42" works great, as the bolt holes line up with the 36" Earthcavator's mounting holes, and you just need to trim the steel to length.

Also, some dimensional info here:

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=121253&SearchTerms=earthcavator

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=120476&SearchTerms=earthcavator

Link to comment
Share on other sites

Josh on the one you have I put some extra bracing on the hitch for side bracing, other than that all the other is the same.:D

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...