Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Kenzen

3314V Axle Wishbone Mount?

Recommended Posts

Kenzen

My job of tubing the front tires of my 3314v turned into a front end rebuild this afternoon. Upon taking the front axle out, I found the axle wishbone mount/pivot to the frame consisted of the 3/4" shaft stuffed through a mangled copper/brass bushing. The online parts diagrams for this tractor has a nut and washer identified for this connection, but there's no threads for this type of connection.

Do I possibly have an axle from another tractor installed by the PO? What's a known, practical/good way (not a nuclear grade approach) to repair/rebuild this pivot point. I can cut and weld as necessary.

Thanks,

Ken

Share this post


Link to post
Share on other sites
fishnwiz

Kenzen,

If you go to Littlemary'a post titled "Beginning the B-10 restoration", you will find one of the more common methods for this repair within that post. Good luck, Mark

Share this post


Link to post
Share on other sites
Kenzen
quote:Originally posted by fishnwiz

Kenzen,If you go to Littlemary'a post titled "Beginning the B-10 restoration", you will find one of the more common methods for this repair within that post. Good luck, Mark


id="quote">
id="quote">Thanks for the lead - If I can locate a short 3/4" ID length of steel pipe, this will be easy. I might even do the zerk fitting and the O-ring...Thanks!Ken

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×