Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

New Wheel Wts


MPH

Recommended Posts

Since I left mostly sand outta my loader wts removing them I dug up my last heavy round irons I scored years back and turned them into two 60lb each wts. Then I added a 25lb wt lifting disc to the outside. To late for a test drive in the snow tonight.

4.6Wts.1.jpg

4.6Wts.2.jpg

4.6Wts.3.jpg

4.6Wts.4.jpg

Hoping 85lbs on each wheel is enough, but the bolts are long enough for one more wt lifting disc.

4.6.Wts.5.jpg

4_6Wts.1.jpg.b3532945003e6bf9b4d97d08eaca6811.jpg

4_6Wts.2.jpg.f1043b649c985db45b98b4df4bd050d2.jpg

4_6Wts.3.jpg.5bb3d6148c2d252c270189a0bc11076a.jpg

4_6Wts.4.jpg.d124d2827c8385f429e044fc81f07bcd.jpg

4.6_Wts.5.jpg.231e82035a988afe794bd969c0899b46.jpg

Link to comment
Share on other sites

GrincheyOne

Slick Marty, I know I can't wait to test drive the 28# weights now on my 4212LTG.

Stay warm,

Wayneid="Book Antiqua">id="size4">

Link to comment
Share on other sites

Nice! Was the center hole big enough to clear the axle on the one side, or did you have to enlarge it?

Link to comment
Share on other sites

Brett, that wasn't a problem on this Gilson as this is what the hub is like on both sides

4.3RustyRim.jpg

You have me wondering now how they fit on the 64LL and the B-112, will have to check it out as I don't recall reaming out the center at all. The center hole is 1 and 7/8 inches, I used a hole saw to cut a plug to drop in to make finding center easy.

4.3RustyRim.jpg.e7ee14931f78729e9ed8d3ec787317fe.jpg

Link to comment
Share on other sites

Ahhhhh. I see. These are on your loader tractor. You can use every bit of the weight for sure.

Link to comment
Share on other sites

Nice job Marty...When I did my Loader project I found that Kwik-Way recomended 300lbs of rear counterweight.

I had 100lbs of fluid in my rear tires and 100lbs of rear weight & hydro tank and 50lbs wheel weights = 250lbs...but with ME on the seat its not a problem :D

Link to comment
Share on other sites

×
×
  • Create New...