Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

motorhead110

3212v carb troubles

Recommended Posts

motorhead110

Well, last week i tore apart my Sovereign 3212v, it wasn't getting spark so off went the motor and we replaced the coil. Then tonight we did a bench test and the motor wouldn't run (It would but only on strait ether). I've narrowed it down to the carb, so i'm gunna rebuild it. But, when i tried to take the main jet out.... well, long story short the threads that the needle thread into are stripped. ngr2 Any ideas how to get it out? ANY help will be much appreciated.

Share this post


Link to post
Share on other sites
sb64

I don't know if this is the same thing, but when i had the problem that the threads were mainly just flattened a-little. And of course the jet was stuck. So i drilled out the old one going up 1/16" drill bit size each time. I drilled it out, and retapped the inside where the jet goes. Put the new jet in, and i haven't had a problem since. Just make sure you don't go too big on the drill bit size, and drill the threads out.

Share this post


Link to post
Share on other sites
motorhead110

Ryan,

That probably is the problem, i don't know why i didn't think to do that! (probably just had another brain fart!) I will try that tonight. I will post what happens.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Who's Online (See full list)

    • BLT
    • tadams
    • PGL
    • dossdboss
    • Al Truistic
    • Drhulv
    • casinojim
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • F.U.N.

      F.U.N.  »  sandyhillbill

      Dear Sandhillbill
      Can you please copy me on this data, for Sun Star parts list.
      :
      September 12, 2004 Mike I sent you a PM and have all the mfgs. available for the tiller/hitch/pto/liftgroup if you need me to send them to you. Let me know. Thanks, F.U.N.    
      · 0 replies
    • gwiseman

      gwiseman

      Club banners are available  for members use during show season https://simpletractors.com/forums/topic/57849-simpletractors-club-banners-available/
       
      · 0 replies
  • Adverts

×