Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Hydrolift Hoses


bowhunt4life

Recommended Posts

Anyone have a source for hydrolift replacement hoses and fittings? I'm looking to replace some hoses on a B-series hydrolift.

Thanks

Chris

Link to comment
Share on other sites

Most I've heard get them made. Around here NAPA does it.

Be sure to take the old ones and make sure they know the angles are critical. If they turn the ends the wrong way, you can't twist the hoses far enough to hook them up.

Link to comment
Share on other sites

I get them made at work. and not to bad on price either. I have to stop up in that area this week Since I was having a few sets made up for me and a set for another member

Link to comment
Share on other sites

i have made a few at my friends shop you ca get them to put the straight ends on that have the long tube so you can bend them to how you want but thats how i did it

Link to comment
Share on other sites

Chris, If I recall right Bryan Osenga makes them up.

RayS can confirm.I know it was someone on here and they were very reasonable.

Sorry, didn't see Bryan's reply above mine......

Link to comment
Share on other sites

Hey Bryan, how about a price list if your getting these made to sell. The one's I get made at the local NAPA don't have the right angles and never fit right.

Link to comment
Share on other sites

I get mine made at a local hydro shop called Bond Fluidaire. I think it's about $55 to have both of them made. Any hydraulic shop should be able to make them for you.

Link to comment
Share on other sites

I've had a couple sets made, for the $50-60 price range mentioned above. Those 90-degree elbows need to be in the correct position on the hoses, so they don't rub something else inside the tunnel -- there's very little space in there.

Link to comment
Share on other sites

quote:Originally posted by MPH

The one's I get made at the local NAPA don't have the right angles and never fit right.


id="quote">
id="quote">I herd or read on here that the angle fittings are NLA , anybody know if thats true ?.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online (See full list)

    • maxwood
    • SmilinSam
    • Bill725
  • Recent Status Updates

    • gwiseman

      gwiseman

      As you know SimpletrACtors.com has changed some recently. Working through this so PM me with questions, suggestions, and/or challenges you have. Appreciate your patience and feedback.
      · 0 replies
    • gwiseman

      gwiseman

      Site programming updates were made 3/23/2024. As a result some things have changed including dues payment options. We will continue maintenance and work with technicians to regain credit card payment option and clear up minor challenges. On positive it appears attaching pictures is now easier. Good day. Gene 
      · 1 reply
  • Adverts

×
×
  • Create New...