Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Driveshaft spacers


bud119195

Recommended Posts

On the 7010 I just bought the spacers that connect the drive shaft to the flywheel are missing.Does someone know how thick these are to be and can the be made or did Did Simplicity do something special that I need to find factory ones?

Link to comment
Share on other sites

Try .625 OD X .385 ID X 1.158 Long .

Cut a piece of wood and see how it fits .

You can also adjust a bit with BGB drive flange.

Link to comment
Share on other sites

I have done it two ways. I have made the spacers from tubing. I have also just used stacks of washers.

I do not own a tractor that has the original engine. Mine have all been built up from junkers. Only one tractor has an original spacer, and it still needed a few washers to make everything line up as it should.

Link to comment
Share on other sites

quote:Originally posted by HubbardRA

I have done it two ways. I have made the spacers from tubing. I have also just used stacks of washers.


id="quote">
id="quote">Done it both ways as well
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...