Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

1967 Landlord

Recommended Posts


Need pto shaft for 1967 Landlord, model number 990568. Shaft old part number 157681 and new part number is 2157681sm. Have been told discontinued. Would like NOS or good used one. Shaft is 6.5 inches long, 7/8 diameter with 1.5 inch long keyway on each end, 3/16 deep and wide. Any help on locating one appreciated. Thanks

Share this post

Link to post
Share on other sites

Its still available, I just purchased one from Jacks a month ago, the only difference was the drive pulley was part of the shaft(non-removable) expensive though, 69 dollars and two new bearings at 10? bucks a pc.

Share this post

Link to post
Share on other sites

That one you mentioned fits a 3112 Sovereign. The welded on pulley is 5 inch diameter and the one I need is 4 inch. Also on the end of the shaft you mentioned, the keyway is not slotted all the way to the end of the shaft. I need the shaft slotted all the way to the end, so a double pulley will attached. This landlord has a "w" drive belt to the mowing deck and requires the smaller drive pulley to have more RPM to the mowing deck.

Share this post

Link to post
Share on other sites

Sorry Joe, the PTO shaft from my '68 LL (2110) has the fixed pulley at one end and the double pulley at the other. Little dark out right now to

check the '69 LL, and the '65 BIG TEN. I'll look tomorrow.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • abu507
    • GregB
    • PhanDad
    • Tom45
    • tamurmueen
    • lt-scir
    • Brettw
    • SmilinSam
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Bubba1997


      Searching for a Sleeve hitch and breaking plow and other equipment if price is right and also a deck for a B1 thank you 
      · 3 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁

      · 1 reply
  • Adverts