three hole rims?

[ronin70]

My little b207 had tire issues with the aggs lately, so I pulled one off to reseat and put a new valve on it, and noticed it has a three hole rim. ive never seen one of those before and was wondering, if I wanted to get another set of rimd for it, what kind would I use, five hole?Thanks

[Talntedmrgreen]

The 3-hole were used on early small frame tractors, before they went to a keyed shaft. Much stronger bond to teh rim, but you still have to watch for the holes to elongate, where the hub pins to the axle. I've seen some with a half inch of play...

I don't thinks a 5-bolt would line up 3 of the holes. I beleive the pattern has a greater diameter. There are LOTS of parts Broadmoors out there that share these rims with your AC. I'd look for used if you need one.

[Burntime]

Couldn't you make a cardboard template, take out the valve stems, weld up the holes and redrill? Just a thought.