Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Petekahn

newbee with a 990314 & a front PTO question

Recommended Posts

Petekahn

Hi.. Recently bought a 990314. I also bought a snow blower which may or may not fit. I dont have the front PTO pulley. Can anyone tell me the size of the front PTO pulley? I will post pictures. I am not sure I have the correct snowblower. thank in advance. I appreciate all the help I can get!

Share this post


Link to post
Share on other sites
RayS

The pulley is 4" diameter with a 1" bore or you can use a 4-1/2" diameter with a 1" bore. The original was 4-1/4" diameter with a 1" bore, but good luck finding that other than on ebay or placing an ad in the classifieds. The first two recommendations will work fine.

The reason for not being able to post picture is in the link below and so are the options. Welcome to the club!

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=119527

Share this post


Link to post
Share on other sites
rokon2813

I can look, I may have a blower drive pulley here.

The "correct" blower for that tractor would have tapered ends, not square, ie the front of the blower is wider than the rear of the blower.

Many of the blowers are interchangeable, the important part is the hitch. You should have a hitch with 2 pulleys on it, and the engagement is built into the top of the hitch.

Facing the rear of the blower, near the top of the hitch on the right will be a short lever (6 to 8") that pulls on one of the pulleys.

I don't have any pics handy, but it should look like the blower in this topic.

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=133917

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×