Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

2110 attachments fit 7116


landlord2110

Recommended Posts

Direct fit no.

Pulley size is different on the deck, and the adjusters will be under the running boards so you can't lift the deck.

The snow plow is the same, but the hitch is different. The lift arm on the 2110 plow frame is tilted back and in too far and will hit the hood on the 7116 so you cant lift the plow.

Blower housing is the same, with a different hitch.

Tillers have different drive pulley sizes and different idlers.

All of them can be made to fit with different hitches, parts etc, but there is no direct fit between the 2.

The 2110 is a short wheelbase, has shorter side plates for the transmission, uses a different mid pto and the front pto is outside the grill.

The 7116 has a longer wheelbase, longer side plates, cone clutch, and uses a different mid pto to run the blower.

hope that helps. ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...