Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Two strange questions

Recommended Posts


Question #1Will this blower from a B-10 fit on a B-1?

blower and mower 003.jpg

Question #2Can someone who has a rear lift handy measure and tell me the amount of travel at the end of the lift sleeve from down (horizontal) to up (almost vertical)?Thanks in advance.


Share this post

Link to post
Share on other sites

Thanks Bob,

I have

one tractor in the basement with no lift

one tractor buried in the shed with no battery to run the electric lift

one tractor in the backyard under a tarp frozen down with two feet of snow on it

Otherwise I would measure it myself.

Share this post

Link to post
Share on other sites
quote:Originally posted by BLT

From what I can see the blower is backwards compatible.Question two will have to wait for daylight.:D I assume that is with lift pin in place.

id="quote">Go here: http://www.simpletractors.com/what_fits/ac_backfit/st_b-110_b-series_600.htm > The blower was never meant to go on B-1 or B-10. But if some one has arleady mated it, he then has found the work around.The pin came out of my lift and tractor is too wet sloppy to repair it now. But with lift paralell (low) to ground to its appoximate lift position is about 3-1/4 ". I manually took a swag about where the high side would stop.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Who's Online (See full list)

    • 720nut
    • BLT
    • Brettw
    • MasterOfNone
  • Today's Birthdays

    1. Carchief
      (57 years old)
    2. Geoff
      (56 years old)
    3. mohrds
      (51 years old)
  • Recent Status Updates

    • SonOfCreepfeed


      Thinkin' about this old girl.

      · 2 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁

      · 1 reply
  • Adverts