36" Tiller #2029936

[JeffH 0]

Hi, Does anyone know if a 36" AC Tiller #2029936 for a B-210/B-212 will fit a Simplicity 7117H? I have been through the "What Fits", cross reference, and attachment catalog pages of this site and I am still uncertain. The 1969 B-series attachment pages shows an illustration of the tiller. From what I can see, the PTO drive pullies look similar, but different enough that I question if it would fit. Any advice would be be greatly appreciated! Thanks in advance....

[JohnN 0]

I'm not sure about your perticular problem, however the link below my help. I have the next newer model tiller the one that was made for the 300 series AC It fits my B-210 and my 7117H. The hook up is much simplier then yours appears to be however. For info that may be helpful see message# 5666. This a question I asked a week or two ago. and contains some interesting stuff. Best of luck, John[A href='http://www.simpletractors.com/operation/tiller1/32_rotary_tiller.htm']http://www.simpletractors.com/operation/tiller1/32_rotary_tiller.htm[/a]

[SmilinSam 4,244]

I have a B210 36" tiller that I use on a 917 AC. The 36" 210 tillers are basically the same as the newer ones but have a engagement lever on the tiller itsel since the tractor only has a drive pulley-no engagement. All the lever on the tiller does is to pull the idler up and provide tension on the drive belt. I just leave mine engaged all the time and use the tractor PTO lever to turn it on and off. The newer tillers just replace the engagement lever with a spring to hold the idler up all the time. Sam

[JohnN 0]

I agree with Sam, from what I've seen it will fit. It was very late last night/morning and I kept reading 32" tiller. Which is different but should fit with a little help. In that case see the LINK I added. It will be more informative than I origionally thought.[A href='http://www.simpletractors.com/clubhouse/ShowMessage.asp?MsgID=5666&mode=short&startwith=120']http://www.simpletractors.com/clubhouse/ShowMessage.asp?MsgID=5666&mode=short&startwith=120[/a]