Headlights

[bud119195]

Got a set of pod lights on my 3415 that the bulbs dont work.since origionals are not available what is a alternate bulb that will work in the sockets,Was thinking of making Plexigals covers for the lens.

[dhoadley]

I seem to remember a discussion about this awhile ago. Is this what you're looking for?

http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=123039&SearchTerms=pod,headlights

Dave

[Brettw]

If all 4 bulbs are bad, I would check the connections first. It might just be a bad ground or power supply.

[BLT]

Check the bulbs first. The bulb case is not grounded so you have to jumper both power points with a plus and minus to light up bulb.

[bud119195]

All bulbs are shot.glass came off the metal base when I took them out.ran a test light and have power to all 4 sockets

[GregB]

I think these are the ones I bought.

http://www.topbulb.com/gbe-bulb-20w-12v-alr-37mm-18-spot-halogen-ansi-gbe

Same base, but no lense like the OEM bulb. I was going to cut off the OEM lense and glue it to the backside of the trim plate for appearance.

But it is way down on the to do list at this point.

[dave45056]

I just did my headlights. You can check out what I did here:http://www.mytractorforum.com/showthread.php?t=577017

The best bulb to buy in my opinion is the SATCO S1970. These are taller and larger diameter than normal MR16's, and they plug right in.

[GregB]

I like the look of the Satco bulb. It looks like an easy fix.

[RayS]