rich_kildow Posted May 11, 2014 Posted May 11, 2014 I was using my 7116 to haul a trailer to move firewood this afternoon and forgot that I had only loosely installed the back idler pulley. This is the one on the spring tensioned mount that you switch ears for snowblower or mower operation. I found the pulley and bolt, but lost the nut, washer, and belt guide. The first two are no biggie, but the third one seems slightly important. I can't even find it in the parts diagram on Partstree? https://www.partstree.com/parts/?lc=simplicity&mn=1691382+-+7116%2C+Hydro+%28ML%29&dn=13085 It would mount between 14 and 23. Can anybody help me with a part number?
rich_kildow Posted May 11, 2014 Author Posted May 11, 2014 Or was this somebody else's add on and isn't really neccesary?
PhanDad Posted May 11, 2014 Posted May 11, 2014 Your probably looking for part #2162115, the belt stop that goes on this pulley for snow blower use. It's part of the mfg #1690557 single pulley front hitch. I run the stop for mowing also, I figure it can't hurt and I don't have to go looking for it when mounting the snow blower. Here's the link to the Partstree diagram: https://www.partstree.com/parts/?lc=simplicity&mn=1690557+-+36%22+%26+42%22+Snowthrower+Hitch&dn=18033
rich_kildow Posted May 11, 2014 Author Posted May 11, 2014 That would be it! It didn't even cross my mind that it wouldn't be a core part of the tractor.
(4).thumb.jpg.4ee281d90cd1cb02ff30c1e1c3e1220a.jpg)
Recommended Posts