Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Lost a belt guide/retainer


rich_kildow

Recommended Posts

I was using my 7116 to haul a trailer to move firewood this afternoon and forgot that I had only loosely installed the back idler pulley. This is the one on the spring tensioned mount that you switch ears for snowblower or mower operation. I found the pulley and bolt, but lost the nut, washer, and belt guide. The first two are no biggie, but the third one seems slightly important. I can't even find it in the parts diagram on Partstree?!

https://www.partstree.com/parts/?lc=simplicity&mn=1691382+-+7116%2C+Hydro+%28ML%29&dn=13085

It would mount between 14 and 23. Can anybody help me with a part number?

Link to comment
Share on other sites

Your probably looking for part #2162115, the belt stop that goes on this pulley for snow blower use. It's part of the mfg #1690557 single pulley front hitch. I run the stop for mowing also, I figure it can't hurt and I don't have to go looking for it when mounting the snow blower.

Here's the link to the Partstree diagram:

https://www.partstree.com/parts/?lc=simplicity&mn=1690557+-+36%22+%26+42%22+Snowthrower+Hitch&dn=18033

Link to comment
Share on other sites

That would be it! It didn't even cross my mind that it wouldn't be a core part of the tractor.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...