oldjoe Posted May 12, 2014 Posted May 12, 2014 installed new belt. stems; 1/2x83, per Simplicity/ I have now about 2 1/2 inches too much slack a two blade deck I figure I have not routed the belt correctly. My manual shows a diagram for a 3 blade deck with the pto belt on top entering the pto and on bottom to left pulley Anyone have a diagram for proper routing of belt?
BLT Posted May 13, 2014 Posted May 13, 2014 Try this manual and see if it helps. There should be a product number of mower and deck on LH side of frame maybe above front tire. http://bsintek.basco.com/BriggsDocumentDisplay/heCyEN8bwK6rE3Cvh5kbp796Dq.pdf
farmtoybuilder Posted May 13, 2014 Posted May 13, 2014 Did you order an A-81 belt? it's 83 on od. If you ordered an A-83 it's 2" too long!
Recommended Posts