gilmoreb Posted May 14, 2014 Posted May 14, 2014 I recently purchased a simplicity landlord with all the attachments the one with a problem is the sickle bar they took the cutting bar off to sharpen it and lost it can i find a bar ? Or any ideas some one might have would be appreciated , thanks BTG
drbrian722 Posted May 14, 2014 Posted May 14, 2014 You'll be at the mercy of what others have hanging around or ebay. If you have the model number of the sickle it will help narrow down what bar you need.
fishnwiz Posted May 14, 2014 Posted May 14, 2014 You may find parts if you run an ad on Craigslist. Good luck!
CarlH Posted May 14, 2014 Posted May 14, 2014 You *may* be able to fab one. 1: Member HTews makes nicely drilled bars to which you can add Simplicity/AC sections. You will need to fab a bracket to attach the pitman to. Sections are hard to find. 2: Nearest Brand X sections are Sears. Section dimensions are the same but smaller rivets are used. Also hard to find. Then get some raw bar from McMaster Carr and drill your own holes. Also will need to fab the pitman bracket. Welcome to SimpleTractors
TylerK Posted August 18, 2019 Posted August 18, 2019 On 5/15/2014 at 1:18 AM, Killer_A-C said: I have a NOS sickle head if that helps you. Do you still have this sickle head?
Bill725 Posted August 18, 2019 Posted August 18, 2019 Looks like Webbs Sickle Service is now cuttingcomponents.com.
PhanDad Posted August 19, 2019 Posted August 19, 2019 @Killer_A-C Great to see you back on the site again.
720nut Posted August 19, 2019 Posted August 19, 2019 (edited) Thought Dan in New York was making parts for them ? I know I bought several things a few years back Edited August 19, 2019 by 720nut
Recommended Posts