landlord2110 Posted May 15, 2014 Posted May 15, 2014 lever to change tranny speed is loose-wont go into any gear and is stuck in first gear. any advice
fishnwiz Posted May 15, 2014 Posted May 15, 2014 Michael is right. You can also check out Zippo Varga on you tube who shows the finer points of the "Bent screwdriver trick" Good luck and happy probing
landlord2110 Posted May 15, 2014 Author Posted May 15, 2014 tried a few times, no luck. thought i heard something drop on the inside.
landlord2110 Posted May 15, 2014 Author Posted May 15, 2014 I made it worse-now it wont move forward without stalling.
Burntime Posted May 15, 2014 Posted May 15, 2014 You basically put it in both reverse and forward. Now just undo what you did twice. I played for an hour and gave up. I went back 5 minutes later and it was a piece of cake. Believe me, sometimes you have to walk away. But...it does work!
fishnwiz Posted May 15, 2014 Posted May 15, 2014 Did NOT work for me so I gave up (after 5 hrs) and sold the tractor!
Talntedmrgreen Posted May 15, 2014 Posted May 15, 2014 The bent screwdriver has never let me down...that's not to say I haven't called it a wide variety of things I'd cringe to have had my mother hear me say.
GrincheyOne Posted May 15, 2014 Posted May 15, 2014 quote:Originally posted by TalntedmrgreenThe bent screwdriver has never let me down...that's not to say I haven't called it a wide variety of things I'd cringe to have had my mother hear me say. id="quote">id="quote">REALLY ??? Josh!!
landlord2110 Posted May 16, 2014 Author Posted May 16, 2014 I have a broken Shift Stem(part # 154261) which is no longer available. Does anybody have a used one?
Recommended Posts